(iii) A reference to a local coordinate system with the controlling stations listed (ii) A reference to the Maryland Coordinate System with the controlling stations and a combination factor comprised of an elevation factor and a scale factor noted (i) A reference to true north, as determined by astronomic observation (g) A statement indicating the origin and method of determination of the bearings or coordinate system shall be made on a plat, and shall include one of the following: ![]() (e) Relevant natural or artificial visible features shall be labeled, dimensioned, and referenced to the nearest property boundary line or represented by a symbol on the plat in its proper location, and each symbol shall clearly indicate what is represented or shall be labeled for identification either individually or in a separate key to symbols (d) Markers shall be labeled as "found" or "set", with a brief description of the marker and relevant reference markers, if any, along with their spatial relationship to the subject corner (c) Dimensions, bearings, or angles, including sufficient data to define curves, shall be neatly and legibly shown with respect to each property boundary line (b) Plats may not be smaller than 8-1/2 x 11 inches (a) A reasonably stable and durable drawing paper, linen, or film of reproducible quality, is considered suitable material for boundary survey plats (2) A plat shall be prepared in conformity with the following procedures: (1) An original plat of a boundary survey shall be a reproducible drawing at a suitable scale, clearly indicating the results of the field work, computations, research, and record information, as compiled, checked, and analyzed. (2) Observable physical evidence, including boundary, possession, visible encroachments, and visible indications of rights, including evidence of recorded servitudes or those that may be acquired by prescription or adverse possession, shall be located. (1) Field measurements shall be made by methods that will provide the precision required by this regulation. In providing appropriate monumentation for boundary surveys, a surveyor shall comply with the minimum standards for survey markers set forth in COMAR 09.13.03. (c) Affect the location of the property's boundaries.ĭ. (b) Have the potential for disclosing conflicting descriptions of the property's boundaries, or (a) Be material in locating the property's boundaries, (2) The surveyor shall make a reasonable effort to identify, locate, and review private survey records which are cited in the provided public records and which may: ![]() ![]() (b) Conflicting record property boundary line locations which may differently locate the property's boundaries. (a) The location of the property's record boundaries, so long as the information exists in the public records and is properly indexed and (1) The surveyor shall be provided by the party requesting the survey with copies of public records and private records, if any, in sufficient scope and depth that a surveyor of ordinary prudence and skill may consider in identifying with reasonable certainty the following: (2) Shown on a plat upon completion of the boundary survey so that the property lines can be determined or readily reestablished. (1) Set or recovered on the ground, to the extent feasible and Unless otherwise directed by the party requesting the survey, sufficient monuments or reference control points which were used to determine the property lines shall be: (2) The purpose of a boundary survey is to establish, reestablish, or describe, or all of these, the physical position and extent of the boundaries of real property.ī. (1) The boundary survey is a means of marking boundaries for sufficient definition and identification to uniquely locate each lot, parcel, or tract.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |